- Two Cai Mep terminals now run one shared berth and can handle three large ships at once.
- Maersk’s new paperwork rule, as announced, covers exports from Australia, not Vietnam.
- Agree who lodges shipping documents, and by when, before each booking.
On 9 October 2026, two Cai Mep terminals in Vietnam began running one shared berth, which operators say could add nearly 900,000 TEU of yearly capacity. Maersk has also set a 38-hour shipping instruction deadline for Australian exports from November. Importers should confirm who lodges documents, and by when, for each Vietnam booking.
Two shipping changes this month matter to importers buying from Vietnam. Two container terminals at Vietnam’s Cai Mep-Thi Vai port complex have begun joint commercial operations, Splash247 reported. Separately, Maersk has announced a stricter paperwork rule for exports from Australia. Both are useful signals for importers who ship goods out of Vietnam.
What is changing at Cai Mep port in Vietnam?
Cai Mep International Terminal (CMIT) and Tan Cang-Cai Mep Thi Vai Terminal (TCTT) have connected their adjacent facilities so ships, equipment and staff can be shared. The shared berth went into commercial operation on 9 October. It creates a continuous 1,200-metre berth.
Three large containerships can now be handled at once, compared with a maximum of two before. The operators estimate capacity at each terminal could rise by 30% to 40%, or 400,000 to 500,000 TEU a year per facility. A TEU is one 20-foot container. That adds up to nearly 900,000 TEU a year for the two terminals together.
These figures describe potential capacity. Neither report says what the change will do to freight rates.
Does Maersk’s shipping instruction rule apply to Vietnam?
Maersk’s notice covers export shipments from Australia, not Vietnam. Maersk will apply a No Shipping Instruction, No Load Policy to applicable export shipments from Australia. A shipping instruction is the set of details the carrier uses to prepare the bill of lading.
In Maersk’s notice, republished by DataPortuaria, the soft launch is 2 November 2026 and the hard stop starts on 30 November 2026. The draft bill of lading (the verify copy) must be completed no later than 38 hours before the vessel’s estimated arrival at the first load port.
No matching Maersk notice for Vietnam loads had been published when this was written. Ask your forwarder whether your carrier uses a similar cut-off on your Vietnam booking.
What could hold up or speed up my container?
Late paperwork is one delay you can control. Here is what the sources point to.
- May speed up: the two ports can coordinate ship planning, berth arrangement, equipment and people better, especially when ship schedules fluctuate.
- May hold up: late or incomplete shipping instructions can delay the draft bill of lading, and cargo may be rolled, held, returned or delayed. Rolled means moved to a later vessel.
- May hold up: if a shipment has split transport documents and one draft stays incomplete, the whole shipment may be affected.
On cost, Maersk says storage, detention, demurrage, terminal handling and rehandling charges may be passed on under its terms. That wording is from the Australian notice.
What should importers agree with suppliers and forwarders?
Agree the paperwork roles before the booking, not after the cut-off passes. These are general points, not rules from the sources.
- Who submits the shipping instruction: the supplier, the forwarder or you.
- The document cut-off for each booking, and who confirms it in writing.
- Who checks the draft bill of lading, and how fast they reply with changes.
- Who pays if cargo is rolled because documents were late.
- How the new Cai Mep berth affects your booked vessel and port.
What to do next
Ask your forwarder for the document cut-off on your next Vietnam booking this week. If you are weighing up what to import next, see our products made in Vietnam or ask about sourcing from Vietnam.
This is general information, written on 12 October 2026. Check the carrier notice and a licensed customs broker or forwarder for your shipment.
Questions about this topic
Does Maersk’s No Shipping Instruction, No Load policy apply to shipments from Vietnam?
Maersk’s notice covers export shipments from Australia. It has a soft launch on 2 November 2026 and a hard stop on 30 November 2026. No Vietnam version had been published when this was written, so ask your forwarder whether your carrier applies a similar cut-off.
How much capacity will the shared Cai Mep berth add?
Operators say the shared berth could add nearly 900,000 TEU a year across both terminals. That is about 400,000 to 500,000 TEU at each one. It is potential capacity, not a guaranteed result.
What is a shipping instruction in container shipping?
It is the set of shipper details the carrier uses to prepare the bill of lading. In Maersk’s Australian notice, late or incomplete instructions may delay the draft bill of lading. Cargo may then be rolled, held, returned or delayed.
Sources
- Cai Mep terminals combine operations to add 900,000 teu capacity (Splash247, 2026-10-10)
- TCTT and CMIT put the shared terminal at Cai Mep – Thi Vai into commercial operation (DredgeWire, 2026-10-09)
- Maersk implements No Shipping Instruction, No Load Policy for Australian exports (DataPortuaria (Maersk notice), 2026-10-06)