Skip to main content

AVF Partners

News3 November 20266 min read

Vietnam food packaging safety: what brands should check

Vietnam's food regulator is looking harder at food-contact packaging. Here is what to check with your factory before your next run.

AVF PartnersUpdated 3 Nov 2026
Hot sauce bottles line a store shelf
  • Vietnam’s regulator is stressing packaging risks, but no new ban on pack types was reported.
  • Ask your factory for food-contact documents on every bottle, sachet, film and lid.
  • Keep the paperwork current, because inspections after products reach the market are getting more attention.

At a Hanoi seminar on 28 October 2026, a Vietnam Food Administration deputy director said food safety management needs more risk assessment and post-market inspection, including for food-contact materials. No new pack ban was reported. Food brands should ask their Vietnamese factory for food-contact documents on bottles, sachets and films.

Vietnam food packaging safety was a main topic at a seminar in Hanoi on 28 October 2026. The event was covered by Viet Nam News. It matters to food brands that make sauces, chilli oil, noodles or rice paper in Vietnam, and to the grocers and importers who buy from them. This explainer sets out what was said, what it does not say, and what to ask your factory.

What did Vietnam’s regulator say about packaging safety?

The Vietnam Food Administration, part of the Ministry of Health, said packaging needs closer risk control. This was reported from a seminar run by the Vietnam Association of Food Science and Technology, the National Institute for Food Control, Tetra Pak Vietnam and TH Group.

The administration’s deputy director said food safety management should put more weight on risk assessment, post-market inspections, monitoring and early warnings. He also pointed to testing capacity, verification and traceability, and to data sharing between agencies.

The seminar heard that the administration has reviewed all 66 national technical regulations. Four of them cover packaging, utensils and materials that touch food. Discussion also covered proposed changes to the Law on Food Safety.

The report also said the safety of food-contact packaging depends on the material and how it is used. Substances can move from a pack into food, and that can be affected by temperature, contact time and how well the material suits the food. Judging packaging safety needs test results and compliance with the technical rules.

Will it change the packs my co-packer can use?

Not on what has been reported. The coverage describes a push for stronger risk control and evidence, not a ban on any bottle, sachet or film.

A white bottle with a red cap
Each bottle, cap and film that touches the sauce needs its own food-contact paperwork. Photo by personalgraphic.com on Unsplash.

Packaging safety rules in Vietnam are not new. A VnEconomy article from August 2025 lists the Law on Food Safety No. 55/2010/QH12, which says packaging and containers must not affect food quality and safety. It also lists Decree No. 15/2018/ND-CP and Circular No. 34/2011/TT-BYT. The first says packaging that touches food must not contain toxic substances. The second says packaging must not contain contaminants. You can read that summary on VnEconomy.

So the likely change is in how closely packs are checked, not which packs exist. A factory that already keeps good records should find this easy. A factory that buys cheap film or bottles with no paperwork may be pushed to tighten up.

The seminar also covered greener packaging. The report said any move to greener packs must be backed by checks on material safety, how well the pack suits the line, and whether it can be collected and recycled. Safety and sustainability are being discussed together.

Which food-contact documents should you ask for?

Ask for a document for each pack part that touches your product. That means the bottle or jar, the cap liner, the sachet or pouch film, the inner bag and any tub or lid.

The sources do not list a required document set, so treat the list below as general good practice. Your factory or a licensed adviser can tell you what the Vietnamese rules and your own market require for your pack.

  • Material description: what the pack is made of, and the name of the pack supplier.
  • Food-contact declaration: a statement from the pack supplier that the material is suitable for food contact.
  • Test results: migration tests (checks on whether substances move from the pack into food) that match how you use it, such as hot-filled (filled while hot), oily or acidic sauce.
  • Use limits: the temperature and storage conditions the pack is meant for.
  • Change notice: a promise that the factory tells you before it switches pack supplier or material.

Why these points? The Viet Nam News report says migration depends on temperature, contact time and material fit. A chilli oil in a hot-filled bottle is a different test case from a dry noodle pillow pack.

Your market’s rules still apply to the finished product. If you sell in Australia, the US, Canada, the EU or the Middle East, ask your factory and local importer which packaging documents your market needs. This is general information written on 2 November 2026. Check the official source or a licensed customs broker for your product.

Could packaging safety checks raise your costs?

They could, but none of the sources give a cost figure. Extra testing, paperwork or a switch to a different material may add to the pack price, and that can reach your landed cost (the total cost to get stock to your door).

Greener materials can cost more. The VnEconomy article says businesses see the relatively high cost of biodegradable packaging as a major hurdle. Our post on food packaging costs and private label shows how pack costs flow through to landed cost.

Lighter packs can offset some of this. TH Group told the seminar that material optimisation and weight reduction cut its plastic use by around 600 tonnes a year and saved tens of billions of Vietnamese đồng in production costs. That is one company’s result, not a rule of thumb, but it shows pack design is a cost lever too.

For grocers, this matters most on house-brand packs, where you choose the bottle and film. For importers, it is a reason to ask for the documents before stock ships, not after it arrives.

What should you do now?

Start with a pack audit. List every part of your pack and ask your factory for the document on each one.

  1. List each pack part that touches your product, with the supplier name.
  2. Ask for the food-contact declaration and test results for each part.
  3. Check the tests match your fill temperature, oil or acid level and shelf life.
  4. Agree that the factory will tell you before any pack change.
  5. Keep the files where you, your importer or a retailer can find them fast.

The regulator’s interest in post-market inspections and traceability is a reason to keep records current. Our posts on what the proposed food safety law means for factories and on what to check when choosing a contract manufacturer cover the wider picture. Our quality and compliance page explains how we approach checks.

If you want a Vietnamese factory with pack documents in order, tell us what your market or retailer needs and you can start a project with us.

Questions about this topic

Has Vietnam banned any food packaging?

No ban was reported in coverage of the 28 October 2026 seminar. The Vietnam Food Administration said it has reviewed its national technical regulations, including four that cover food-contact packaging, and wants stronger risk control.

What is food-contact packaging?

It is any pack part that touches your food, such as a bottle, cap liner, sachet film, pouch or tub. These parts need to be safe so that harmful substances do not move into the food.

Does this affect products I import into Australia?

Vietnam’s rules apply to how the factory makes and packs the product. Your destination market has its own rules, so ask your factory and importer which packaging documents you need, and check the official source or a licensed customs broker.

Will safer packaging cost more?

It may, if the factory needs extra tests or a different material. The sources give no cost figure, so ask for a quote that shows any pack change before you approve it.

Sources

  1. Food packaging innovation must balance safety and circular economy (Viet Nam News, 2026-10-28)
  2. Safety for food packaging (VnEconomy, 2025-08-05)

Cover photo by Zoshua Colah on Unsplash.

Ready to make your product in Vietnam?

Tell us what you want to make. We reply within 1 business day.