- Missing or wrong documents are a major cause of border delays for imported food.
- Food referred for inspection must stay on hold, and a failed test can trigger 100% inspection of later shipments.
- Detention charges can start on the day the container is unloaded from the ship, so delays cost money quickly.
Food shipments into Australia are often held up by missing or wrong documents, by inspections and tests under the Imported Food Inspection Scheme, and by holding orders after a failed test. As of October 2026, importers can prevent many of these delays by lodging complete documents early, checking labels before printing and booking inspections quickly.
Many imported food shipment delays in Australia have nothing to do with storms or busy ports. They come from missing or wrong documents, food inspections and tests at the border, and holding orders after a failed result. For importers, grocers, kitchens and food brands, a delay can mean empty shelves before a busy season, plus extra charges while the container waits. Many of these delays can be prevented with checks done before the goods leave the factory.
What causes imported food shipment delays at the border?
Paperwork that is missing or wrong is a big cause. The Department of Agriculture, Fisheries and Forestry (DAFF) checks import documents before it tells you what must happen to your goods. In a September 2023 industry notice, DAFF looked at its 2022-23 lodgement data for all imports, not only food. It found that 13.2% (39.3k) of lodgements had insufficient documents and 5.5% (16.2k) had document errors.
DAFF said these problems have a significant impact on delays in checking documents. Its advice to importers and brokers was practical:
- Lodge documents well before the goods arrive.
- Make sure they are complete and accurate, and meet DAFF’s minimum document requirements and import conditions.
- Put any specific extra information in the additional information field in COLS (DAFF’s Cargo Online Lodgement System).
- Name a valid Approved Arrangement inspection location, ideally with its registration number and name, whatever outcome you expect.
- Do not keep calling or emailing to check status, because it takes staff away from assessments.
In the same notice, DAFF expected its clearance workload to rise in the lead-up to the Christmas peak. If that pattern holds this year, late or messy documents in October and November are more likely to cause a delay. Your invoice, packing list and certificate of origin should also show the same product names, quantities and origin. If you claim lower duty under a trade agreement, our news on Vietnam’s new rules of origin decree and your duty paperwork covers what to ask your supplier.
How does a food inspection hold up your stock?
If your food is referred for inspection, it must stay on hold and you cannot distribute it. Imported food for sale is inspected and tested under DAFF’s Imported Food Inspection Scheme (IFIS). DAFF issues a Food Control Certificate to tell you which lines must be held and which tests apply.
How often your food is inspected depends on how DAFF classifies it:
- Risk food (food that Food Standards Australia New Zealand advises is a medium or high risk to public health): every consignment is referred. The inspection rate starts at 100%, drops to 25% after 5 passes in a row, then to 5% after a further 20 passes. One fail takes it back to 100%.
- Surveillance food (most other food): DAFF refers 5% of consignments at random, using electronic profiles in the Integrated Cargo System.
Risk food inspection rate by compliance history, Australia
% of consignments
See the data
| Inspection rate | |
|---|---|
| Starting rate | 100 |
| After 5 passes | 25 |
| After further 20 passes | 5 |
For risk food, the compliance history is based on the producer, country of origin and tariff code. A new producer has no history yet, so its first shipments can face a higher inspection rate. Some risk foods also need a recognised certificate before they can be imported.
Three things can make the hold longer:
- If testing is needed, you must name a laboratory that is an appointed analyst under IFIS before you can book the inspection.
- When samples are taken, DAFF’s advice on whether the food passed only arrives once the test results are known.
- If you are not ready or do not follow instructions, DAFF may cancel the inspection and still charge you, and you must book again.
What a failed inspection or holding order means
Food that fails inspection cannot be released. You must relabel it if the problem is the label, or destroy or re-export it under the supervision of an authorised officer. When a surveillance food fails, DAFF applies a holding order, and future consignments are referred at 100% until a history of compliance is built, normally after five passes in a row.
That is the hidden cost. One label mistake can slow every later shipment of that product, not just the one in port. Every inspected consignment gets a visual and label check, and the food must comply with the Food Standards Code and country of origin labelling rules.
What can delay a food shipment before it leaves?
Some delays start at the origin port, before the ship sails. These are common risks, and the details depend on your carrier and booking:
- Missed document cut-offs. Carriers set deadlines for shipping instructions and other papers, and a late submission can mean the container misses the ship. Our news on Cai Mep port and carrier paperwork deadlines shows why this matters for Vietnam cargo.
- Rollovers. A rollover is when the carrier moves your container to a later sailing, often because the ship is full in a busy season.
- Transhipment changes. If the container changes ships at a hub port, a missed connection can add time.
- Late production. If the container is not packed and ready in time, it misses its booking.
Who manages these risks depends on your Incoterm (the trade term that sets who books the freight). Our guide to EXW, FOB and DDP for food importers explains who is responsible at each stage.
What does a delay cost while the container waits?
A held container keeps adding charges while you wait for paperwork or test results. Demurrage is a charge for keeping a full container at the terminal after its free days run out. Detention is a charge for keeping the carrier’s container too long before you return it empty.
These charges can start earlier than many importers expect. For example, carrier OOCL’s published terms for Australia say import detention for local cargo starts at 00:00 on the day the container is unloaded from the ship. It ends at 23:59 on the day the empty container is returned to the carrier’s designated facility.
On top of this, DAFF charges for food inspections, and your laboratory sets its own testing charges and bills you directly. A failed product may also need relabelling, destruction or re-export. Free days and daily rates vary by carrier and contract, so check them when you book.
What to do next to prevent delays
Prevent many delays by doing the checks before your goods are packed. We suggest these steps for every new product or supplier:
- Check the import conditions in BICON (DAFF’s Biosecurity Import Conditions database), including the tests for your food.
- Check the label against the Food Standards Code and country of origin labelling rules before it is printed.
- Find out whether your food is risk food and needs a recognised certificate, and get it before shipping.
- Make product names, quantities and origin match across the invoice, packing list and certificate of origin.
- Lodge documents early and completely, with a valid inspection location named.
- If an inspection or test is likely, choose an appointed laboratory early so you can book quickly.
Our food product launch checklist puts these checks alongside the other steps before a first run. This is general information, written on 16 October 2026, so check the official DAFF source or a licensed customs broker for your product. If you are bringing food from Vietnam into Australia, the US, Canada, the EU or the Middle East, you can ask about sourcing from Vietnam.
Questions about this topic
What happens if imported food fails inspection in Australia?
Food that fails inspection cannot be released. The importer must relabel it if the problem is the label, or destroy or re-export it under the supervision of an authorised officer. DAFF issues an Imported Food Inspection Advice that gives the reasons for the fail and explains what to do next.
What is a holding order on imported food?
When a surveillance food fails inspection, DAFF applies a holding order to target future consignments of that food. Those consignments are then referred for inspection at 100% until a history of compliance is built, normally after five passes in a row. Food under a holding order cannot have a virtual inspection.
How much imported food does DAFF inspect?
Every consignment of risk food is referred. The inspection rate starts at 100% and drops to 25% and then 5% as the food builds a history of passes. For surveillance food, which is most other food, DAFF refers 5% of consignments at random.
When do container detention charges start?
It depends on the carrier and your contract. For example, OOCL’s published terms for Australia say import detention for local cargo starts at 00:00 on the day the container is unloaded from the ship. Check the free days and charges on your own booking.
Sources
- Imported Food Inspection Scheme (Department of Agriculture, Fisheries and Forestry, 2025-09-04)
- Inspecting and testing imported food (Department of Agriculture, Fisheries and Forestry, 2022-11-14)
- 200-2023: Import Document Assessment Delays (Department of Agriculture, Fisheries and Forestry, 2023-09-22)
- Demurrage & Detention Free Time and Charges (OOCL)
Cover photo by Ali Mkumbwa on Unsplash.