- Your shelf life and monthly sales set the most you should make, whatever the co-packer’s minimum is.
- Packaging minimums are often the hardest part of a minimum order to move, so ask about them early.
- Split batches, smaller packs, pilot runs and pre-orders can lower the risk of a first run.
If a co-packer’s minimum order quantity is higher than you planned, size your first run from your sales, not from the minimum. Check monthly sales, your shelf life, and the cash and storage you can commit. If the minimum is still too high, ask about a smaller pack, split batches or a pilot run.
Many founders get a quote back and find the co-packer minimum order quantity (the smallest run a factory will make) is well above the first batch they planned. Don’t just order the full minimum, and don’t walk away either. Start from your own numbers: how many units you can sell before the best-before date gets close, how much cash you can tie up, and where the stock will be kept. Then use that number to talk to the co-packer about the run size, the pack size or the packaging. The same sums apply to grocers planning a first house-brand line.
What drives a co-packer minimum order quantity?
A minimum covers the factory’s fixed costs, so it is not a random number. One US product developer explains in a guide to co-packer MOQs that the minimum is the smallest run that makes the factory’s time worth booking. The main drivers are:
- Cooking and cleaning time. A kettle takes the same time to heat, cook, cool, transfer and clean, whether the batch is small or large.
- Filling line setup. Setting fill weights, changing caps and checking seals can take 45 to 90 minutes before a single jar is filled.
- Ingredient minimums. If the factory opens a fresh drum for a short run and the rest goes unused, that cost can be added to your invoice.
- Packaging minimums. Jars, labels, cases and shipping cartons usually come by the pallet. The same source puts a typical jar supplier minimum at 5,000 to 10,000 units per SKU (each product and pack size you sell), and says this is usually the hardest minimum to move.
For sauces, the same guide says craft and regional co-packers often run 1,500 to 5,000 units, and mid-sized national co-packers often start at 8,000 to 20,000 units per SKU. These are US figures, and the guide itself says to treat any number as a starting point. Rice paper, noodles and seasonings depend on the line and the pack, so ask each factory directly.
Also check what the minimum is counted in. It may be finished units, a minimum cook size that gives you more product than you asked for, or a set number of runs each year. Our guide to asking a co-packer for a small test run covers how to raise this with a factory.
How much stock can a new brand safely hold?
Your shelf life puts a ceiling on how much you should make. Under Standard 1.2.5 of the Food Standards Code, packaged food is date-marked with a use-by or best-before date. The NSW Food Authority says manufacturers are responsible for setting shelf life and must be able to back it up to enforcement authorities.
It is illegal to sell food after its use-by date. Food marked best before can be sold after that date if it has not deteriorated or perished. But a first run should not depend on that, so plan to sell well before the date. No date mark is needed when the best-before date is two years or more away.
Shelf life is set by testing, not by guessing. Methods include shelf life studies (storing samples under normal conditions and testing them over time) and accelerated studies (storing them warmer to speed up change). A NATA-accredited laboratory can help. Make sure the date stays readable on every pack, as our guide to best-before and batch code labelling explains.
Then work out your real selling window. Start with the shelf life and take away the time for production, shipping, border clearance and warehousing, plus the time your stockists and shoppers need. Business Queensland warns against holding too much perishable stock, because unsold food may have to be written off.
How do you work out cash, storage and sell-through before committing?
Before you commit, turn the minimum into three numbers: how much cash it ties up, how much space it needs, and how many months it takes to sell. We suggest this order:
- Estimate monthly sales per SKU. Use confirmed orders, stockist commitments, online sales and pre-orders. Be conservative.
- Work out months of stock. Divide the minimum by your monthly sales. If the answer is longer than your selling window, the run is too big, or you need more sales channels before you order.
- Count the full cash cost. Use the landed cost per unit (the total cost to get each unit to your door), not just the factory price. Our landed cost calculation guide shows how. Business Queensland lists other costs of holding stock: ordering, insurance, storage, freight, interest, spoilage, and the labour behind each one.
- Plan the storage. Count the pallets, check the temperature the product needs, and decide who will hold it. Business Queensland suggests asking whether suppliers can hold stock for you or deliver straight to customers.
- Test it in a cash flow forecast. business.gov.au suggests testing changes with a cash flow statement and an adviser before you make them.
Stock on hand is money you cannot use until it sells. If the full minimum would leave you short of cash in a quiet month, that is your answer.
How can you lower the risk of your first run?
You usually have more choices than ordering everything or walking away. Ask the co-packer about these:
- One cook, several products. Cook one shared base sauce, then split it into smaller filled lots with different finishing ingredients.
- A smaller pack. A small bottle costs much less in total than a large jar at the same unit minimum. It can also lower a retailer’s risk in stocking you.
- Standard packs with your label. Ask if a bottle or jar the factory already buys can carry your label, instead of custom-printed packaging with its own minimum.
- A pilot batch. This is a smaller trial at a higher price per unit, used to check that the recipe works at scale. Pilots are more common with factories you plan to keep working with.
- Pre-orders. Sales taken before production help pay for the run and prove demand.
- Supplier terms. Business Queensland suggests asking suppliers about holding stock and payment terms.
Keep in mind that smaller runs cost more per unit, because the fixed costs are shared across fewer units. Check that your margin still works at the smaller size. For our current minimum runs, contact us for a quote.
What should you do next?
Have your numbers ready before you go back to the co-packer. That gives you something real to negotiate with.
- Get tested shelf life data for your product and pack.
- Work out monthly sales, months of stock and the full cash cost per SKU.
- Ask the factory what its minimum is counted in, and which of the options above it offers.
- Work through our food product launch checklist before your first order.
This is general information, written on 31 October 2026. Check the official source or a licensed customs broker for your product. We work with brands in Australia, the US, Canada, the EU and the Middle East, and you can start a project with us when you are ready.
Questions about this topic
Why do co-packers set minimum order quantities?
Minimums cover fixed costs such as cooking and cleaning time, filling line setup, ingredient minimums and packaging bought by the pallet. A small run spreads those costs over fewer units, so factories set a minimum that makes the run worth booking.
Should I order the full minimum to get a lower unit price?
Only if you can sell the stock well before its best-before date and can afford the cash and storage. Divide the minimum by your realistic monthly sales and compare the answer with your usable shelf life. If it takes longer to sell than the shelf life allows, the lower unit price may be lost to spoilage.
Can I sell food after its best-before date in Australia?
Yes. The NSW Food Authority says food marked best before can be sold after that date if it has not deteriorated or perished. Food past its use-by date cannot legally be sold, so a first run should be sized to sell well before either date.
How can I make a smaller first production run?
Ask about splitting one cook across several products, a smaller pack, standard packaging with your own label, or a pilot batch. Pre-orders and supplier terms can also reduce the cash you need upfront. Expect a higher price per unit on smaller runs.
Sources
- Date marks and storage (NSW Food Authority)
- Co-Packer MOQs: How to Afford Your First Production Run (Molly Mills Creative, 2026-04-22)
- Stock control: the basics (Business Queensland, 2022-11-16)
- Improve your cash flow (business.gov.au, 2025-05-20)
Cover photo by Zoshua Colah on Unsplash.