- Compare the landed cost per unit, not the factory price.
- Imported finished food goes through DAFF’s Imported Food Inspection Scheme and must carry a compliant label.
- Shelf-stable products travel well, while chilled and short-life food often suits local production.
For Australian food brands in 2026, making a shelf-stable product overseas and importing it can cost less per unit. That only holds once you add freight, duty, GST and border inspection. Making it in Australia skips the import steps and suits chilled or short-life food, so compare the full landed cost, not the factory price.
Founders often ask whether it is cheaper and easier to manufacture food overseas or locally. The short answer: importing finished goods can lower the unit cost of shelf-stable products, but it adds freight, border taxes, inspection risk and longer planning. Making the product in Australia keeps the supply chain short and suits food with a short shelf life. In this guide (written 27 October 2026) we show how we compare the two options for Australian brands. Buyers in other markets can use the same steps.
How do you compare the cost of making food overseas or locally?
Compare the landed cost per unit, not the factory price. Landed cost means the total cost of one unit once it reaches your warehouse. A low overseas quote can end up close to a local quote once every charge is added.
For imported goods, the cost lines usually include:
- the supplier price for the product and packaging
- sea freight and insurance
- customs duty, where it applies
- GST on the import
- customs broker, port and inspection charges
- local delivery to your warehouse or customer
According to the ATO’s guide to GST and imported goods, GST is 10% of the value of the taxable importation. That value is the customs value plus any duty, plus the cost of transport to Australia and insurance. Basic food that would be GST-free if sold in Australia is not taxed on import. GST-registered businesses may be able to claim a GST credit, and eligible importers can defer payment under the deferred GST scheme.
The Australian Border Force says that for goods worth over AUD1,000 you must pay all duties, taxes and charges, including an import processing charge, before the goods are released. All imported goods are liable for duty and taxes unless an exemption or concession applies. Food made in Vietnam may qualify for a preferential duty rate under trade agreements Australia and Vietnam share, such as AANZFTA, CPTPP and RCEP. Under CPTPP, DFAT says the goods must meet the rules of origin and be backed by a Certification of Origin, or the standard rate of duty may apply. Check the rate for your product on DFAT’s FTA Portal. Our step-by-step landed cost calculation shows how to put these lines together.
What import rules apply to finished food?
Finished food imported for sale is inspected and tested under the Imported Food Inspection Scheme (IFIS), run by the Department of Agriculture, Fisheries and Forestry (DAFF). This is the main extra step that local production avoids. How often your product is checked depends on whether it is a risk food or a surveillance food.
Risk foods are foods that FSANZ advises pose a medium or high risk to public health. DAFF refers every consignment of risk food for inspection. The inspection rate starts at 100%, falls to 25% after 5 passes in a row, then to 5% after a further 20 passes, and goes back to 100% if the food fails.
Risk food inspection rate at the Australian border by pass history
% of consignments inspected
See the data
| Risk food | |
|---|---|
| Starting rate | 100 |
| After 5 passes | 25 |
| After 20 more passes | 5 |
Most other food is surveillance food, and DAFF refers 5% of these consignments at random. If a surveillance food fails, a holding order applies and future consignments are checked at 100%, normally until five pass in a row. Food that fails cannot be released. The importer must relabel it if the problem is the label, or destroy or re-export it under supervision.
Labels matter on both routes. DAFF reminds importers that allergens must be declared in plain English in bold, with a separate ‘Contains’ statement. The stock-in-trade period ended on 25 February 2026, so all food for sale must now meet these rules. DAFF suggests checking supplier specification sheets and reviewing sample labels before printing.
Making locally does not always remove import steps. If your recipe uses imported ingredients, those still cross the border. Our guide to what holds up imported food shipments explains where delays usually start. This is general information, so check the official source (BICON and DAFF) or a licensed customs broker for your product.
How do minimum orders, lead times and shelf life compare?
Overseas production usually means planning further ahead and holding more stock, while local production gives you shorter, more flexible runs. Neither is always better. It depends on your sales volume and how long your product lasts.
| Point | Make overseas and import | Make in Australia |
|---|---|---|
| Unit cost | Depends on the full landed cost, not the factory price | Depends on the local quote, with no import charges |
| Order size | Runs are often planned around a full or shared container | Smaller, more frequent runs may be possible |
| Planning time | Production plus transit and clearance | Shorter supply chain |
| Shelf life on arrival | Some shelf life is used up in transit | More shelf life left when stock reaches you |
| Border steps | Import declaration, IFIS, biosecurity conditions | None for the finished product |
Minimum runs vary a lot between factories in both countries. If the first quote is too big for a test launch, our guide on how to ask a co-packer for a small test run explains what drives minimums.
Which food products suit import, and which suit local production?
Shelf-stable products suit import best, and chilled or frozen products with a short life often suit local production. Products that keep at room temperature can travel in standard containers without refrigeration.
- Good fit for import: bottled sauces, fish sauce, chilli oil, dry seasonings and marinades, rice paper and dried noodles.
- Often better made locally: fresh chilled sauces, ready meals and other food with a short use-by date.
- Check carefully: frozen food and anything containing meat, dairy or egg, because cold chain costs and import conditions can change the maths.
Some brands do both. They import a shelf-stable core range and make chilled lines close to their customers.
What to do next
Get two quotes and compare them on the same basis before you decide. We suggest this order:
- Write a one-page brief: recipe, pack size, shelf life target and expected yearly volume.
- Ask a local manufacturer and an overseas co-packer to quote the same brief.
- Turn the overseas quote into a landed cost per unit, including duty, GST and clearance charges.
- Check whether your product is a risk or surveillance food in BICON, and draft a compliant label.
- Run our food product launch checklist before you commit to a first run.
We make fish sauce, chilli oil, sauces, rice paper, noodles and seasonings in Vietnam for brands in Australia, the US, Canada, the EU and the Middle East, and if a shelf-stable product fits your plan, you can start a project with us.
Questions about this topic
Is it cheaper to manufacture food overseas than in Australia?
It can be for shelf-stable products, but only once you compare the full landed cost per unit. Freight, insurance, duty, GST, broker and inspection charges are added to the factory price. Always compare a local quote and an overseas landed cost for the same recipe and pack size.
How is GST worked out on imported food in Australia?
The ATO says GST on imports is 10% of the value of the taxable importation, which includes the customs value, any duty, transport to Australia and insurance. Basic food that would be GST-free if sold locally is not taxed on import. GST-registered businesses may be able to claim the GST back as a credit.
Will my imported food be inspected at the border?
Imported food for sale falls under DAFF’s Imported Food Inspection Scheme. Risk foods start at 100% inspection and the rate drops as they build a record of passes, while 5% of surveillance food consignments are referred at random. Every inspection includes a visual and label check, and samples may be tested.
Which food products are best to import rather than make locally?
Shelf-stable products such as bottled sauces, fish sauce, chilli oil, dry seasonings, rice paper and dried noodles travel well in standard containers. Chilled food with a short use-by date is usually easier to make close to your customers. Frozen products and foods with meat, dairy or egg need a careful check of cold chain costs and import conditions.
Sources
- Imported Food Inspection Scheme (Department of Agriculture, Fisheries and Forestry, 2025-09-04)
- IFN 10-25: Mandatory allergen labelling requirements (Department of Agriculture, Fisheries and Forestry, 2025-10-14)
- GST and imported goods (Australian Taxation Office, 2024-05-13)
- Import declarations (Australian Border Force, 2026-09-23)
- Vietnam country brief (Department of Foreign Affairs and Trade)
- Guide to obtaining preferential tariff treatment using CPTPP (Department of Foreign Affairs and Trade)
Cover photo by Arno Senoner on Unsplash.